Home » Infrastructure » Windows » Oracle response file net configuration assistant (Windows XP Pro ENG)
Oracle response file net configuration assistant [message #421768] Thu, 10 September 2009 06:49
deadcops
Messages: 1
Registered: September 2009
Junior Member
Hello,

I have created an custom response file for my installation of oracle because I want it to install without interference of a human. But at the end it starts the Oracle net configuration assistant. Then I have to press cancel and yes before it finishes.

Can anyone help me put the configuration assistent off?

Attatched the configuration manager that starts.

This is my response file:
####################################################################
##                                                                ##
##     Oracle9i Client Custom Install Response File Template      ##
## -------------------------------------------------------------- ##
##                                                                ##
## Copyright(c) Oracle Corporation 1998,2000. All rights reserved.##
##                                                                ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
##                                                                ##
## Each variable is associated with a comment. The comment        ##
## identifies the variable type.                                  ##
##                                                                ##
## Please specify the values in the following format:             ##
##                                                                ##
##         Type         Example                                   ##
##         String       "Sample Value"                            ##
##         Boolean      True or False                             ##
##         Number       1000                                      ##
##         StringList   {"String value 1","String Value 2"}       ##
##                                                                ##
## The values that are given as <Value Required> need to be       ##
## specified for a silent installation to be successful.          ##
##                                                                ##
##                                                                ##
## This response file is generated by Oracle Software             ##
## Packager.                                                      ##
####################################################################

[General]

RESPONSEFILE_VERSION=1.7.0

[SESSION]

#-----------------------------------------------------------------------------
# Name          : UNIX_GROUP_NAME
# Datatype      : String
# Description   : Unix group to be set for the inventory
#               : directory. Valid only in Unix platforms.
# Valid values  : a string containing the group name
# Example value : "install"
# Default value : none
# Mandatory     : No
#-----------------------------------------------------------------------------

UNIX_GROUP_NAME=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : FROM_LOCATION
# Datatype      : String
# Description   : Complete path of the products.jar file from the staging area
#                 containing products to install
# Valid values  : Full path ending in "products.jar"
# Example value : "e:\stage\products.jar"
# Default value : "..\stage\products.jar"
# Mandatory     : No
#-----------------------------------------------------------------------------

FROM_LOCATION="C:\test\Oracle\stage\products.jar"

#-----------------------------------------------------------------------------
# Name          : FROM_LOCATION_CD_LABEL
# Datatype      : String
# Description   : This variable should only be used in multi-CD installations.
#                 It includes the label of the Compact Disk where the file
#                 "products.jar" exists. The label can be found in the file
#                 "disk.label" in the same directory as products.jar.
# Valid values  : Any string
# Example value : "oracle9i"
# Mandatory     : No
#-----------------------------------------------------------------------------

FROM_LOCATION_CD_LABEL=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION_RESPONSE
# Datatype      : String
# Description   : Optionally specifies the full path of next session's
#                 response file. If only a file name is specified, the
#                 response file is retrieved from <TEMP>/oraInstall
#                 directory. This variable is only active if
#                 NEXT_SESSION is set to true.
# Valid values  : Full path to a valid response file or a response file name
# Example value : "c:\temp\install.rsp"
# Default value : None
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION_RESPONSE=<Value Unspecified>

#-----------------------------------------------------------------------------
# Name          : ORACLE_HOME
# Datatype      : String
# Description   : Full path of directory to use for installing Oracle
#                 products - the "Oracle Home"
# Valid values  : Directory path (existent or non-existent)
# Example value : "d:\oracle\products\9.0.1"
# Default value : none
# Mandatory     : Yes
#-----------------------------------------------------------------------------

ORACLE_HOME="C:\oracle\ora92"
#-----------------------------------------------------------------------------
# Name          : ORACLE_HOME_NAME
# Datatype      : String
# Description   : Name used to uniquely identify the Oracle Home on this 
#                 system.
# Valid values  : String that is unique on this system
# Example value : "OHOME1"
# Default value : none
# Mandatory     : Yes
#-----------------------------------------------------------------------------

ORACLE_HOME_NAME="OraHome92"

#-----------------------------------------------------------------------------
# Name          : TOPLEVEL_COMPONENT
# Datatype      : StringList
# Description   : Top-level product and version to install
#                 The format is of the form {"<Internal name>", "<version>"}
# Note          : DO NOT CHANGE THE DEFAULT VALUE.
#                 To install different top-level products, use one of the
#                 other response file templates
# Mandatory     : Yes
#-----------------------------------------------------------------------------

TOPLEVEL_COMPONENT={"oracle.client","9.2.0.1.0"}

#-----------------------------------------------------------------------------
# Name          : DEINSTALL_LIST
# Datatype      : StringList
# Description   : List of components to be deinstalled during a
#               : deinstall session
# Valid values  : <"oracle.server","9.2.0.1.0">
# Default value : none
# Mandatory     : No
#-----------------------------------------------------------------------------

DEINSTALL_LIST=<"oracle.client","9.2.0.1.0">

#-----------------------------------------------------------------------------
# Name          : SHOW_SPLASH_SCREEN
# Datatype      : Boolean
# Description   : Set to true to show the initial splash screen of the
#                 installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_SPLASH_SCREEN=false

#-----------------------------------------------------------------------------
# Name          : SHOW_WELCOME_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the Welcome page of the installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_WELCOME_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_COMPONENT_LOCATIONS_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the component locations page in
#                 the installer.  This page only appears if there are
#                 products whose install directories can be changed.
#                 If you set this to false you will prevent the user
#                 from specifying alternate install directories.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_COMPONENT_LOCATIONS_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_CUSTOM_TREE_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the available products
#                 selection tree during a Custom install
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_CUSTOM_TREE_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_SUMMARY_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the Summary page in the
#                 installer
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_SUMMARY_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_INSTALL_PROGRESS_PAGE
# Datatype      : Boolean
# Description   : Set to true to show the install progress screen.
#                 This screen shows detailed status of the
#                 installation, which file is being copied, which link
#                 action is being performed, etc.  It also shows
#                 percentage complete.
# Valid values  : true, false
# Default value : true
# Mandatory     : Yes
#-----------------------------------------------------------------------------

SHOW_INSTALL_PROGRESS_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_REQUIRED_CONFIG_TOOL_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the status screen for
#                 required configuration tools.  This screen shows the
#                 status of each tool along with detailed information
#                 in the event of tool failure.
# Valid values  : true, false
# Default value : true
# Mandatory     : Yes
#-----------------------------------------------------------------------------

SHOW_REQUIRED_CONFIG_TOOL_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_OPTIONAL_CONFIG_TOOL_PAGE
# Datatype      : Boolean
# Description   : Set to true to display the optional configuration
#                 tool page which allows you to launch optional
#                 configuration tools and view details status,
#                 including details on any failures.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_RELEASE_NOTES
# Datatype      : Boolean
# Description   : Set to true to show the release notes screen from
#                 which Release Notes can be viewed.  NOTE, 9.0.1 does
#                 not use any release notes so this will not be
#                 relevant for an 9.0.1 install.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_RELEASE_NOTES=false

#-----------------------------------------------------------------------------
# Name          : SHOW_ROOTSH_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true to display the dialog which prompts the
#                 user to run root.sh before a database is created.
#                 If this is set to false, the root.sh script can be
#                 run manually after installation, but the Database
#                 Configuration Assistant may not have permissions to
#                 update the oratab file if this is the first Oracle
#                 installation on the machine.
# Valid values  : true, false
# Default value : true
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_ROOTSH_CONFIRMATION=false

#-----------------------------------------------------------------------------
# Name          : SHOW_END_SESSION_PAGE
# Datatype      : Boolean
# Description   : Set to true to display end session dialog.  This
#                 page shows whether the installation is successful.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_END_SESSION_PAGE=false

#-----------------------------------------------------------------------------
# Name          : SHOW_EXIT_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true to display dialog for confirming exit.
#                 If set to false, installer will exit without
#                 prompting.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_EXIT_CONFIRMATION=false

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION
# Datatype      : Boolean
# Description   : Set to true to allow users to go back to the File
#                 Locations page for another installation.  If this is
#                 set to true, NEXT_SESSION_RESPONSE should be used to
#                 indicate location of the second reponse file.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION=false

#-----------------------------------------------------------------------------
# Name          : NEXT_SESSION_ON_FAIL
# Datatype      : Boolean
# Description   : Set to true to allow users to go back to the File
#                 Locations page for another installation even if the
#                 first installation failed.  This flag is only
#                 relevant if NEXT_SESSION is set to true.
# Valid values  : true, false
# Default value : false
# Mandatory     : No
#-----------------------------------------------------------------------------

NEXT_SESSION_ON_FAIL=false

#-----------------------------------------------------------------------------
# Name          : SHOW_DEINSTALL_CONFIRMATION
# Datatype      : Boolean
# Description   : Set to true if deinstall confirmation is needed
#               : during a deinstall session.
# Valid values  : true, false
# Default value : true
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_DEINSTALL_CONFIRMATION=false

#-----------------------------------------------------------------------------
# Name          : SHOW_DEINSTALL_PROGRESS
# Datatype      : Boolean
# Description   : Set to true if deinstall progress is needed during
#               : a deinstall session.
# Valid values  : true, false
# Default value : true
# Mandatory     : No
#-----------------------------------------------------------------------------

SHOW_DEINSTALL_PROGRESS=false

#-----------------------------------------------------------------------------
# Name          : LOCATION_FOR_DISK<disk number>
# Datatype      : String
# Description   : Set to the full path of the root of the subsequent CDs in 
#                 the Oracle9i set.  This may be a mounted CD-ROM location or
#                 a location on the hard drive if you have copied the
#                 CD images to the hard disk.
# Valid values  : full path to the root of the CD corresponding to the disk
#                 number indicated.  
# Default value : None
# Mandatory     : Yes
#-----------------------------------------------------------------------------

LOCATION_FOR_DISK2="C:\test\Oracle"
LOCATION_FOR_DISK3="C:\test\Oracle"

#-----------------------------------------------------------------------------
# End of GENERAL SESSION section
#-----------------------------------------------------------------------------


#
# Oracle9i Client
#

[oracle.client_9.2.0.1.0]

#-----------------------------------------------------------------------------
# Name          : COMPONENT_LANGUAGES
# Datatype      : StringList
#-----------------------------------------------------------------------------
COMPONENT_LANGUAGES={"en"}

#-----------------------------------------------------------------------------
# Name          : INSTALL_TYPE
# Datatype      : String
# Description   : Type of installation for the Oracle9i Client
# Note          : DO NOT CHANGE THE DEFAULT VALUE.
#                 To install using a different install type, use one of the
#                 other response file templates
# Mandatory     : Yes
# Example       : INSTALL_TYPE = "Custom"
#-----------------------------------------------------------------------------

INSTALL_TYPE="Custom"

#-----------------------------------------------------------------------------
# Name          : DEPENDENCY_LIST (oracle.client)
# Datatype      : StringList
# Description   : List of optional products to be installed along with
#                 this one.  The following choices are available.  The
#                 value can contain any combination of these choices.
# Note          : The products listed are optional dependencies.  Any
#                 required dependencies will automatically be installed.
# Valid values  :
#    oracle.emcltprod, 9.2.0.1.0 : Oracle Enterprise Manager Products 9.2.0.1.0 
#    oracle.networking.netcltprod, 9.2.0.1.0 : Oracle Network Utilities 9.2.0.1.0 
#    oracle.utilities.util, 9.2.0.1.0 : Oracle Database Utilities 9.2.0.1.0 
#    oracle.java, 9.2.0.1.0 : Oracle Java Utilities 9.2.0.1.0 
#    oracle.rdbms.sqlplus, 9.2.0.1.0 : SQL*Plus 9.2.0.1.0 
#    oracle.apache.isqlplus.ise, 9.2.0.1.0 : iSQL*Plus Extension for Windows 9.2.0.1.0 
#    oracle.java.jdbc, 9.2.0.1.0 : Oracle JDBC/OCI Interfaces 9.2.0.1.0 
#    oracle.java.jdbc.thin, 9.2.0.1.0 : Oracle JDBC/THIN Interfaces 9.2.0.1.0 
#    oracle.oid.client, 9.2.0.1.0 : Oracle Internet Directory Client 9.2.0.1.0 
#    oracle.winprod, 9.2.0.1.0 : Oracle Windows Interfaces 9.2.0.1.0 
#    oracle.rdbms.ocitop, 9.2.0.1.0 : Oracle Call Interfaces 9.2.0.1.0 
#    oracle.p2k, 9.2.0.1.0 : Oracle Programmer 9.2.0.1.0 
#    oracle.p2k.xmldevkit, 9.2.0.1.0 : Oracle XML Developer's Kit 9.2.0.1.0 
#    oracle.doc.windoc, 9.2.0.1.0 : Oracle9i Windows Documentation 9.2.0.1.0 
#    oracle.swd.oui, 2.0.0.8.0 : Oracle Universal Installer 2.2.0.8.0 
#    oracle.options.ano, 9.2.0.1.0 : Oracle Advanced Security 9.2.0.1.0 
#    oracle.java.sqlj.sqljruntime, 9.2.0.1.0 : SQLJ Runtime 9.2.0.1.0 
#    oracle.options.intermedia.imclient, 9.2.0.1.0 : Oracle interMedia Client Option 9.2.0.1.0 
#    oracle.options.olap.api, 9.2.0.1.0 : Oracle OLAP API 9.2.0.1.0 
#Example : DEPENDENCY_LIST = {"oracle.emcltprod","9.2.0.1.0"}


#-----------------------------------------------------------------------------

DEPENDENCY_LIST={ "oracle.networking.netcltprod", "9.2.0.1.0"}


#
# Oracle Enterprise Manager Products
#

[oracle.emcltprod_9.2.0.1.0]

#-----------------------------------------------------------------------------
# Name          : DEPENDENCY_LIST (oracle.emcltprod)
# Datatype      : StringList
# Description   : List of optional products to be installed along with
#                 this one.  The following choices are available.  The
#                 value can contain any combination of these choices.
# Note          : The products listed are optional dependencies.  Any
#                 required dependencies will automatically be installed.
# Valid values  :
#    oracle.sysman.client, 9.2.0.1.0 : Oracle Enterprise Manager Client 9.2.0.1.0 
#    oracle.sysman.pack.change, 9.2.0.1.0 : Oracle Change Management Pack 9.2.0.1.0 
#    oracle.sysman.pack.diag, 9.2.0.1.0 : Oracle Diagnostics Pack 9.2.0.1.0 
#    oracle.sysman.pack.tuning, 9.2.0.1.0 : Oracle Tuning Pack 9.2.0.1.0 
#    oracle.sysman.pack.apps, 9.2.0.1.0 : Oracle Management Pack for Oracle Applications 9.2.0.1.0 
#    oracle.sysman.pack.std, 9.2.0.1.0 : Management Pack for Oracle Standard Edition 9.2.0.1.0 
#-----------------------------------------------------------------------------

DEPENDENCY_LIST={ "oracle.sysman.client","9.2.0.1.0","oracle.sysman.pack.change","9.2.0.1.0","oracle.sysman.pack.diag","9.2.0.1.0","oracle.sysman.pack.tuning","9.2.0.1.0","oracle.sysman.pack.apps","9.2.0.1.0"}
Previous Topic: This is how I solved the problem. ORA-01033
Next Topic: Oracle 11g installation on Windows XP service pack 2 using DBCA
Goto Forum:
  


Current Time: Thu Mar 28 04:21:12 CDT 2024